Skip to main content

Thread: SATA150 SX4 - Module "sata-sx4" missing?

-

i'm trying install ubuntu server 9.04 x86 (because unfortunately machine bit old , doesn't have x86-64 cpu) on hp proliant ml110 server.

has appears promise fasttrak s150 sx4 sata raid adapter.

when boot ubuntu server cd, seems go fine until gets point tries detect harddrives , fails. apparently hasn't got driver loaded sata card, , asks if want select one, displays list of modules select - none of appear have sata whatsoever.

information revealed google on subject, seems indicate particular type of card should supported in linux kernel several years now, through module called "sata_sx4".

after opening console ubuntu installer, in /lib/modules see if there useful modules, can't find "sata_sx4" anywhere in there. in fact, thing found @ seems have sata @ module called "sata_mv", according google driver different type of sata controller.

why "sata_sx4" missing install cd? has been renamed else? if so, what?
there sane way work without replacing sata controller?

update:
replaced original s150 sx4 controller new promise sata300 tx4 controller instead, worked immediately.
guess new 1 faster anyway, replace it.

i'd still know why s150 sx4 isn't supported on ubuntu cd though, if knows.
maybe sata_sx4 module built kernel, doesn't support particular chip?



Forum The Ubuntu Forum Community Ubuntu Official Flavours Support Installation & Upgrades [ubuntu] SATA150 SX4 - Module "sata-sx4" missing?


Ubuntu

Comments

Post a Comment

Popular posts from this blog

opencv3, tbb and rasp pi 2 - Raspberry Pi Forums

-
Image
has installed opencv 3.0.0 tbb enabled on latest rasperian on pi 2? followed guide here viewtopic.php?f=28&t=110025&p=761255&hi ... v3#p761255 differences made enable tbb via cmake... added build , tbb options shown.. cmake -d cmake_build_type=release -d build_tbb=on -d with_tbb=on -d cmake_install_prefix=$(python3 -c "import sys; print(sys.prefix)") -d python_executable=$(which python3) .. patched current, dependencies installed far can tell.. cmake reports going install , old version of tbb... -- use tbb: yes (ver 4.1 interface 6102) make process fails linking problem don't understand fully, [ 66%] built target opencv_features2d scanning dependencies of target opencv_test_flann ../../lib/libopencv_imgproc.so.3.0.0: undefined reference `tbb::task_group_context::cancel_group_execution()' ../../lib/libopencv_imgproc.so.3.0.0: undefined reference `tbb::interface5::internal::task_base::destroy(tbb::task&)...
Read more

small ethernet problem - Raspberry Pi Forums

-
hello, after conventional installation raspbian noobs v 1.4 raspberry pi 2 . how can configure internet connection on raspberry me download apt. (my ethernet cable connected directly ethernet switch (i'm @ university)) attached configuration of pc internet connection. http://i.imgur.com/budyoeb.jpg thank much, google configuring rpi static ip address. use same ip numbers see on pc. not try have both pc , rpi connected network @ same time. raspberrypi
Read more

Multithumb configuration params not working? - Joomla! Forum - community, help and support

-
hi, i've installed multithumb 1.1 on joomla 1.011 site , works fine in basic set-up (and jce-editor). except when try tweaking mambot params, things stop working. specifically: if use "only in these categories" setting , fill in categoryname, e.g. "news", pop-ups/thumbnails stop working, categories, including "news". if use "not in these categories" these categories still use pop-ups. if select "use thumbnails" "no" not no thumbnails no pop-ups anymore. so way use multithumb selectively use optioni "apply content {multithumb}", bit cumbersome. there more people having these issues? hi bikey, i having issues bit different - yet same.  saying have way set configuration plug-in.  not know how find cong this.  if can maybe read posting - don't bore process.  jce editor - have not installed - still using default html editor - cant recall name.  why not see config file? anyway - find if use static page , pass com...
Read more