32u4 based APRS Tracker

-

hey all... here i've been working on last month.   it's aprs tracker based on trackuino firmware http://www.trackuino.org.

i took sparkfun pro micro eagle files , tossed .brd file.  i added radiometrix hx1 , ublox gps, , changed parts bit easier me deal (which means 0805 mostly, there few 603/402 parts left).

not shown daughterboard connects between jp1 , jp2: have both ldo version , boost converter version; each supply 5v.

as of right it's running custom bootloader , port of trackuino 1.4 john boiles (kk6gip); though i'm in process of integrating port trackuino 1.5 , adding support microsd card.

any comments appreciated.

regards,

brad
kf7fer

ps photo's of old revision "c" boards (where can see how messed soldering jp1)

edit: should add used 3.3v/8mhz version of pro micro

power open source hardware! sharing!

so using atmega32u4-au? isn't sparkfun micro pro using mu? i'm interested in working processor (au can hand solder). did eagle part? asking.

oh, guess have 3 (or multiples of 3) purple boards each revision? ;)

what micro sd slot? willing provide information?

i using 1 got dipmicro on 1 of designs. pins not long struggled bit while learning (burning stuff of course) smd soldering:

http://www.dipmicro.com/store/con-microsd1

they restocking in week or so.


Arduino Forum > Development > Other Hardware Development > 32u4 based APRS Tracker


arduino

Comments

Post a Comment

Popular posts from this blog

opencv3, tbb and rasp pi 2 - Raspberry Pi Forums

-
Image
has installed opencv 3.0.0 tbb enabled on latest rasperian on pi 2? followed guide here viewtopic.php?f=28&t=110025&p=761255&hi ... v3#p761255 differences made enable tbb via cmake... added build , tbb options shown.. cmake -d cmake_build_type=release -d build_tbb=on -d with_tbb=on -d cmake_install_prefix=$(python3 -c "import sys; print(sys.prefix)") -d python_executable=$(which python3) .. patched current, dependencies installed far can tell.. cmake reports going install , old version of tbb... -- use tbb: yes (ver 4.1 interface 6102) make process fails linking problem don't understand fully, [ 66%] built target opencv_features2d scanning dependencies of target opencv_test_flann ../../lib/libopencv_imgproc.so.3.0.0: undefined reference `tbb::task_group_context::cancel_group_execution()' ../../lib/libopencv_imgproc.so.3.0.0: undefined reference `tbb::interface5::internal::task_base::destroy(tbb::task&)...
Read more

small ethernet problem - Raspberry Pi Forums

-
hello, after conventional installation raspbian noobs v 1.4 raspberry pi 2 . how can configure internet connection on raspberry me download apt. (my ethernet cable connected directly ethernet switch (i'm @ university)) attached configuration of pc internet connection. http://i.imgur.com/budyoeb.jpg thank much, google configuring rpi static ip address. use same ip numbers see on pc. not try have both pc , rpi connected network @ same time. raspberrypi
Read more

Multithumb configuration params not working? - Joomla! Forum - community, help and support

-
hi, i've installed multithumb 1.1 on joomla 1.011 site , works fine in basic set-up (and jce-editor). except when try tweaking mambot params, things stop working. specifically: if use "only in these categories" setting , fill in categoryname, e.g. "news", pop-ups/thumbnails stop working, categories, including "news". if use "not in these categories" these categories still use pop-ups. if select "use thumbnails" "no" not no thumbnails no pop-ups anymore. so way use multithumb selectively use optioni "apply content {multithumb}", bit cumbersome. there more people having these issues? hi bikey, i having issues bit different - yet same.  saying have way set configuration plug-in.  not know how find cong this.  if can maybe read posting - don't bore process.  jce editor - have not installed - still using default html editor - cant recall name.  why not see config file? anyway - find if use static page , pass com...
Read more