DUE Vin voltage

-

hello,

i have due board , want power 9v powersupply, connects 5v regulator curcuit, again connects through vin pin on board. board built box , allow direct connection of 9v powersupply.

can use 5v on vin pin or 3,3 v maximum?

quote from: zenseidk on jun 20, 2014, 11:52 am

hello,

i have due board , want power 9v powersupply, connects 5v regulator curcuit, again connects through vin pin on board. board built box , allow direct connection of 9v powersupply.

can use 5v on vin pin or 3,3 v maximum?


vin. input voltage arduino board when it's using external power source (as opposed 5 volts usb connection or other regulated power source). can supply voltage through pin, or if supplying voltage via power jack, access through pin.
5v. pin outputs regulated 5v regulator on board. the board can supplied power either dc power jack (7 - 12v), usb connector (5v), or vin pin of board (7-12v). supplying voltage via 5v or 3.3v pins bypasses regulator, , can damage board. don't advise it.

as see it's clear can supply due using 7-12 when using vin.
http://arduino.cc/en/main/arduinoboarddue


Arduino Forum > Products > Arduino Due (Moderator: fabioc84) > DUE Vin voltage


arduino

Comments

Post a Comment

Popular posts from this blog

opencv3, tbb and rasp pi 2 - Raspberry Pi Forums

-
Image
has installed opencv 3.0.0 tbb enabled on latest rasperian on pi 2? followed guide here viewtopic.php?f=28&t=110025&p=761255&hi ... v3#p761255 differences made enable tbb via cmake... added build , tbb options shown.. cmake -d cmake_build_type=release -d build_tbb=on -d with_tbb=on -d cmake_install_prefix=$(python3 -c "import sys; print(sys.prefix)") -d python_executable=$(which python3) .. patched current, dependencies installed far can tell.. cmake reports going install , old version of tbb... -- use tbb: yes (ver 4.1 interface 6102) make process fails linking problem don't understand fully, [ 66%] built target opencv_features2d scanning dependencies of target opencv_test_flann ../../lib/libopencv_imgproc.so.3.0.0: undefined reference `tbb::task_group_context::cancel_group_execution()' ../../lib/libopencv_imgproc.so.3.0.0: undefined reference `tbb::interface5::internal::task_base::destroy(tbb::task&)
Read more

small ethernet problem - Raspberry Pi Forums

-
hello, after conventional installation raspbian noobs v 1.4 raspberry pi 2 . how can configure internet connection on raspberry me download apt. (my ethernet cable connected directly ethernet switch (i'm @ university)) attached configuration of pc internet connection. http://i.imgur.com/budyoeb.jpg thank much, google configuring rpi static ip address. use same ip numbers see on pc. not try have both pc , rpi connected network @ same time. raspberrypi
Read more

Multithumb configuration params not working? - Joomla! Forum - community, help and support

-
hi, i've installed multithumb 1.1 on joomla 1.011 site , works fine in basic set-up (and jce-editor). except when try tweaking mambot params, things stop working. specifically: if use "only in these categories" setting , fill in categoryname, e.g. "news", pop-ups/thumbnails stop working, categories, including "news". if use "not in these categories" these categories still use pop-ups. if select "use thumbnails" "no" not no thumbnails no pop-ups anymore. so way use multithumb selectively use optioni "apply content {multithumb}", bit cumbersome. there more people having these issues? hi bikey, i having issues bit different - yet same.  saying have way set configuration plug-in.  not know how find cong this.  if can maybe read posting - don't bore process.  jce editor - have not installed - still using default html editor - cant recall name.  why not see config file? anyway - find if use static page , pass com
Read more